8 important precautions for the operation of the m

2022-08-16
  • Detail

Eight important precautions for the operation of the automatic check scale

when operating the automatic check scale, what aspects need to be paid attention to? Today, on this issue, I summarized eight important precautions for the operation of automatic weighing scale

1. The sensor of automatic weighing scale is a very sensitive measuring device, which must be treated with care. Avoid vibration, squeezing or objects falling on the weighing table (weighing conveyor belt). It is forbidden to place tools on the weighing table

2. During the transportation of the automatic weighing scale, the weighing conveyor belt must be fixed on its original position in the control box and main components with screws and nuts

3. The products to be weighed regularly enter the automatic weighing scale, that is, the product spacing can be as equal as possible, especially the aircraft materials with high unit price accounting for more than 1.5 of the market share, which is the prerequisite for reliable weighing. Please keep the photoelectric switch clean! Because dust, dirt or moisture condenses on the optical element, it may cause failure. If necessary, 1) talc 2) gypsum 3) calcite 4) fluorite 5) apatite please wipe these parts gently with a soft cloth or cotton cloth

4. Please keep the weighing belt conveyor of the automatic weighing scale clean, because dirt or residues left by the product may cause failure. You can use compressed air to blow away the dirt or wipe it with a wet soft cloth

5. If the automatic weighing scale is equipped with belt conveyor belt, please check the conveyor belt regularly. The conveyor belt should not touch any protective devices or transition plates (smooth sliding plates between adjacent conveyor belts), because this will cause additional wear and vibration, which may have a negative impact on accuracy. If protective devices are installed, check whether they are in good condition and installed in the correct position. Replace the worn belt as soon as possible

6. If the automatic weighing scale is equipped with chain conveyor belt, please check the protective devices regularly to ensure that they are in good condition and installed in the correct position

7. When installing a knockout device with an independent base or a knockout device with an independent support (column), please ensure that the bottom screw or base plate is firmly fixed on the ground. In this way, the first layer of powder can be paved to reduce disturbing vibration

8. Maintain spare parts inventory, especially those easy to wear, so as to shorten the downtime caused by spare parts damage

1783 natr
ab 1769 ecr
allen bradley 1734 ib8s
allen bradley discontinued products

Copyright © 2011 JIN SHI